SupaVoxel
Free Minecraft statue tool

Turn Any Minecraft 3D Model Into a Block Statue

Drop a 3D model of your pet, your character or a sculpture, choose how many blocks tall the statue should be, and download it as a Litematica build guide. The conversion is free and runs in your browser.

Drop your 3D model here

Rebuild a model from Minecraft blocks matched to its colors and download a Litematica schematic.

Try a sample
STLOBJGLBGLTFFBX3MFPLYUSDZDAESTEP

Runs in your browser — your file never leaves your device

  • From a model or a photo
  • 16 to 128 blocks tall
  • Colors matched to blocks
  • No sign-up

By ·Updated

01

How to turn a 3D model into a Minecraft statue

  1. 01

    Get a 3D model

    Use a GLB, OBJ, FBX, STL, 3MF or similar file you already have, up to 200 MB. Only have a photo? Make the model first with image to 3D and download it as GLB.
  2. 02

    Size the statue

    Drop the file onto the tool above. Set Build height in blocks (16 to 128, default 64) and a Block palette, then click Build schematic. The panel shows the block count, the grid and the six most used blocks.
  3. 03

    Build it in your world

    Click Download .litematic and load it with the Litematica mod as a see-through guide, then build over it, or paste it in Creative. Install steps are on the Minecraft schematic maker page.
02

How tall should a Minecraft statue be?

Pick the height before you convert your Minecraft 3D model. A block is 1 meter and a player is 1.8 blocks tall, so even a 32-block statue towers over you. The statue is a hollow shell, which keeps the block count down.

16–32 blocks

What you get
A chunky figure. Faces become a few colored blocks; good for icons and small builds
Blocks, roughly
Under 3,000

64 blocks (default)

What you get
Recognizable faces, hands and clothing. The sample bust uses about 9,200 blocks
Blocks, roughly
9,000–10,000

96 blocks

What you get
Fine details such as jewelry, patterns and fingers start to show
Blocks, roughly
About 20,000

128 blocks (max)

What you get
A landmark that can be seen from far away; plan a long survival build
Blocks, roughly
35,000–40,000
Build heightWhat you getBlocks, roughly
16–32 blocksA chunky figure. Faces become a few colored blocks; good for icons and small buildsUnder 3,000
64 blocks (default)Recognizable faces, hands and clothing. The sample bust uses about 9,200 blocks9,000–10,000
96 blocksFine details such as jewelry, patterns and fingers start to showAbout 20,000
128 blocks (max)A landmark that can be seen from far away; plan a long survival build35,000–40,000

Only the 64-block figure is measured, on our sample. The others assume the block count of a hollow shell roughly quadruples each time the height doubles; wide models use more.

03

From a photo to a Minecraft 3D model

Most statue ideas start as a picture: a pet, a friend's character, a figure from a game you made. Upload a clear photo of one subject to image to 3D. New accounts get 3 free credits with Google sign-in and no card, and an untextured model is usually ready in under a minute.

Color decides how much a statue looks like its subject. A free untextured model has no colors, so the whole statue matches one gray block. A textured model, typically 3 to 5 minutes to generate on a paid plan, gives the block matcher real colors to work with: fur markings, clothing and eye color. Plain, front-facing photos with the whole subject in frame give the cleanest models.

04

What makes a good Minecraft statue

Strong silhouettes and large color areas survive the move to blocks. Thin details need height.

A pet dog as a 64-block statue: markings come from the textured model's colors
Rounded cartoon animals keep their character even at 32 blocks
Ornate busts like this one need 96 blocks or more for the crown to read
Dancers and action poses work; thin arms need extra height so they stay connected
05

Building the statue in Creative or survival

In Creative, Litematica's Paste mode places the whole statue at once: directly in single player, or with /setblock commands on a server where you have permission.

In survival, it's a project. Open Litematica's Material List to see every block and how many you need; at 64 blocks tall, plan for around 9,000 to 10,000 blocks, about 150 stacks. The Simple palette uses only 27 block types, so there's less to collect. Build from the bottom up over the ghost blocks.

Two things catch people out. The statue is hollow, and Overworld monsters can spawn in any space with no block light, so put torches or other lights inside before you seal it. And the All palette can use concrete powder, sand and gravel, which fall when nothing is under them; Building and Simple leave them out, so chins, arms and wings stay put.

06

Minecraft statue generator tips

Do
  • Use a textured model for statues that should look like the subject
  • Try 48 and 64 blocks and compare the most used blocks before choosing
  • Pick a flat, open site; the grid shows the footprint in blocks
  • Reduce a very heavy model with the mesh simplifier if the browser struggles
Avoid
  • Expect stairs, slabs or glass; statues are built from full blocks
  • Seal a hollow statue without lighting the inside
  • Pick the All palette for a survival build; its falling blocks collapse overhangs
  • Pick a busy group photo; one subject converts far better
07

Looking for a Minecraft-style 3D model for Blender?

Some people searching for a Minecraft 3D model want the opposite: a blocky model to render in Blender or use in a game. The voxelizer does that. It runs the same block conversion but exports a colored GLB, OBJ, STL or MagicaVoxel VOX file instead of a schematic, at 16 to 128 voxels tall. For low-poly game assets rather than cubes, see low poly.

08

Limits of the 3D model to Minecraft conversion

  • Java Edition only. The .litematic file needs the Litematica mod; there is no Bedrock version.
  • Color only. Each block is the closest match to the average color of the surface; textures like fur or stone patterns become color patches.
  • Full blocks, default states. No stairs, slabs, fences, glass or rotated pillars.
  • Up to 128 blocks tall. Width and depth follow the model's proportions.
  • Your file, your rights. Convert models you made or have the rights to use, especially if you share the build.
FAQ

Frequently asked questions

How do I turn a Minecraft 3D model into a statue?

Drop the model onto the tool above, set Build height and a Block palette, and click Build schematic. Download the .litematic file, put it in your .minecraft/schematics folder, and load it with the Litematica mod. It appears as a see-through guide you build over, or paste in Creative.

Can I make a Minecraft statue from a photo?

Yes, in two steps. Turn the photo into a 3D model with image to 3D, which gives new accounts 3 free credits, then convert the GLB here. For a statue in the subject's colors, use a textured model, which needs a paid plan; free untextured models come out in a single block color.

Is this Minecraft statue generator free?

The conversion from a 3D model to a .litematic file is free, with no account and no limit, and runs in your browser. Making a model from a photo uses credits in the studio: 3 are free for new accounts, and textured models need a paid plan.

How many blocks will my statue need?

The tool tells you before you download: the panel shows the exact block count and the six most used blocks. As a guide, our sample bust at 64 blocks tall uses about 9,200 blocks. The statue is hollow, so the count grows about four times when you double the height.

Does it work on Bedrock Edition?

Not directly. The download is a .litematic file for the Litematica mod, which runs on Minecraft: Java Edition. Bedrock, consoles and phones can't load it. You can still use the block list and the 3D preview as a guide and build the statue by hand.

Why is my statue all one color?

The model has no colors. Untextured models and most STL files carry only shape, so every block matches the same gray. Use a textured GLB, or generate a textured model from your photo, and the block matcher will pick blocks for each color area.

Why do some statue parts float or fall apart?

Thin parts like arms, tails or sword blades can be thinner than one block at low heights, so they break into separate pieces. Raise Build height until they connect. Parts that fall in the world are gravity blocks over air, which only the All palette uses; build again with Building or Simple.

Sources

  1. 1.
    How to convert a 3D model to a Minecraft schematic — 3dtolitematic.online
    “The build can be hollow or filled, depending on conversion choices.”
Start free

Build your Minecraft 3D model as a statue

Drop a model into the tool above, or make one from a photo first, and download a block-by-block statue guide.

Free · runs in your browser · no sign-up