SupaVoxel
Mesh to CAD

STL to STEP Converter

Get a closed solid your CAD program can open, measure, cut and combine with other parts. It is a faceted solid built from flat faces, not editable curves, and this page explains exactly what that means before you convert.

STL → STEP converter
100% in-browser
STLSTEP

Drop your STL file to convert it

Preview it, pick options, download the STEP. Nothing is uploaded.

Try a sample

Opens STL · OBJ · FBX · GLB · GLTF · 3MF · PLY · USDZ · DAE · STEP · up to 200 MB

  • Runs in your browser
  • No sign-up
  • STEP AP214, millimeters
  • Coplanar faces merged

By ·Updated

01

Read this first: what an STL to STEP conversion can and can't do

An STL is a bag of triangles. It has no idea that a ring of 64 thin triangles was meant to be a cylinder, so no converter, free or paid, can hand you the original fillets, holes and sketches back. What this tool writes is a faceted B-rep: a valid, closed STEP solid whose faces are the flat polygons of your mesh.

That solid is genuinely useful. You can measure it, section it, place it in an assembly as a reference, subtract it from a block to make a cavity, or add new CAD features to its flat faces. What you can't do is click a hole and change its diameter, or drag a fillet radius. For that you need to rebuild the part in CAD using the faceted body as a guide, or use a reverse-engineering tool that fits real cylinders and planes.

The writer does one thing that makes a real difference: coplanar neighboring triangles are merged into a single face. A cube from an STL arrives as 6 faces instead of 12 triangles; a flat lid with a dozen bolt holes arrives as one face with holes, not hundreds of slivers.

02

How to convert STL to STEP

  1. 01

    Open the STL

    Drop a binary or ASCII STL, up to 200 MB. The panel shows triangles, vertices and file size. Spin it with wireframe on and decide whether the triangle count is reasonable for CAD (see the limits below).
  2. 02

    Confirm units and orientation

    STL has no unit field, so the converter assumes millimeters, which is what slicers and most model sites use. If the output size reads 0.05 × 0.03 × 0.02 mm, the file was saved in meters: switch File units to m. Z-up stays on so the solid sits on the XY plane.
  3. 03

    Convert and open in CAD

    Click Convert to STEP. Vertices are welded, flat regions are merged, and an AP214 file in millimeters downloads. Open it in Fusion, SolidWorks, Onshape, FreeCAD or any OpenCascade-based tool as a normal solid body.
03

What the STL to STEP converter produced on test shapes

Measured with this page's writer. Flat geometry collapses well; curved geometry keeps one face per facet pair.

10 mm cube

STL triangles
12
STEP faces
6
STEP file size
3.6 KB

Cylinder, 64 sides

STL triangles
256
STEP faces
66
STEP file size
26 KB

Sphere, 128 × 64 segments

STL triangles
16,128
STEP faces
8,064
STEP file size
3.0 MB
ShapeSTL trianglesSTEP facesSTEP file size
10 mm cube1263.6 KB
Cylinder, 64 sides2566626 KB
Sphere, 128 × 64 segments16,1288,0643.0 MB

STEP is text, so a curved, high-poly mesh grows to several times its binary STL size. The converter refuses meshes above 200,000 faces and points you to the mesh simplifier.

04

What carries over into the STEP file

Shape
Kept exactly, every facet becomes a planar face on a closed shell
Separate shells
Each mesh becomes its own solid body
Units
Written in millimeters, with the unit declared in the file
Color
One color per solid, from the mesh's first material
Curves and features
Not reconstructed: cylinders stay faceted, there is no feature tree
UVs, textures, normals
Dropped. STEP describes solids, not shading
05

Getting a usable solid out of a mesh

Do
  • Repair first: a mesh with holes makes an open shell. Run it through STL repair before converting
  • Reduce dense scans and AI meshes to 10,000 to 50,000 triangles with the mesh simplifier; CAD stays responsive
  • In Fusion, the Convert Mesh command's Prismatic method tries to fit real planes and cylinders to mechanical parts; use it on the STL if you need editable features
  • In FreeCAD, run Part > Refine shape on the imported solid to merge any remaining coplanar faces
Avoid
  • Don't send a 500,000-triangle sculpt to CAD; even under the limit, a six-figure face count makes most CAD tools crawl
  • Don't expect to edit hole diameters or fillets; rebuild those features on top of the faceted body
  • Don't convert to STEP just to print: slicers want STL or 3MF, and converting back adds nothing
  • Don't leave units on mm for a file exported in meters from Blender; check the size readout
FAQ

Frequently asked questions

Is the STEP file a real CAD solid?

It is a real, closed solid in a standard STEP AP214 file, and CAD programs treat it as a body you can measure, cut and combine. It is not a parametric model: every face is flat, there is no feature history, and a hole is a ring of planar faces rather than a cylinder you can resize. That is true of every STL to STEP converter.

Can I edit the converted part in Fusion 360 or SolidWorks?

You can add features to it: extrude from a flat face, cut a pocket, combine it with another body or shell it. You can't change the shape of curved regions parametrically. A common workflow is to import the faceted solid as a reference and model the clean part over it with real sketches.

Why is my STEP file so much bigger than the STL?

STEP is a plain-text format that stores every face with its own plane, loop and points, while a binary STL packs each triangle into 50 bytes. In our tests a 16,000-triangle sphere grew from about 800 KB as binary STL to 3 MB as STEP. Flat-sided parts grow far less, because coplanar triangles merge into single faces.

Is there a size limit for STL to STEP?

Input files can be up to 200 MB, but the output is capped at 200,000 STEP faces, because larger files open very slowly or not at all in most CAD tools. If your mesh is over the limit, the converter says so and links to the mesh simplifier, where you can reduce it and come back.

What units does the STEP file use?

Millimeters, declared inside the file, so CAD programs place the part at the right size. STL itself has no units: the converter assumes the numbers are millimeters unless you change File units. Check the output size readout before converting; a 0.08 mm figurine means the STL was saved in meters.

Does the converter keep colors?

Each solid gets one color, taken from its first material, and CAD programs that read STEP colors show it. Plain STL files have no color, so most conversions come out in a neutral gray. Multi-color 3MF prints or textured models can't keep per-triangle color in STEP.

Is it free, and is my file uploaded?

It's free with no sign-up, and nothing is uploaded. The welding, face merging and STEP writing all run in JavaScript inside this browser tab, so a confidential part never leaves your machine. Only the page code is downloaded; your geometry is never sent anywhere.
Start free

Convert STL to STEP

Drop a mesh above to get a faceted STEP solid in millimeters, ready to open in CAD.

Free · runs in your browser · no sign-up