SupaVoxel
Free keychain generator

Custom Keychain Maker for 3D Printing

Type a name or drop a logo and get a keychain with a ring hole, a border and raised letters, sized to the millimeter. Download one STL or a two-color 3MF. Free, in your browser.

Building your model…

Design

Font

Size

Plate shape

Colors

For two colors, use the 3MF (two parts, ready for an AMS) or swap filament at the base height.

Runs in your browser — your design never leaves your device.

  • Runs in your browser
  • Name or logo
  • Two-color 3MF
  • No sign-up

By ·Updated

01

How to make a keychain in three steps

  1. 01

    Name or logo

    Under Design, choose Name and type up to 24 characters in one of seven fonts, or Logo / icon and drop an SVG, PNG, JPG or WebP. PNG and JPG are traced; adjust Threshold until the outline is right.
  2. 02

    Size and ring

    Set Total width (25 to 100 mm, including the ring), Base thickness, Raised height and Ring hole. Under Plate shape, Follow letters hugs the outline and Rounded tag gives a classic rectangle; Border sets the margin.
  3. 03

    Download

    Download STL gives one solid body. 3MF · multi-color gives base and letters as two parts for an AMS, and STL per part zips them separately. The default, “Alex” in Pacifico, comes out 50.0 × 23.1 × 4.2 mm.
02

Keychains people print

Two-color tags: dark base, raised design, 4 mm ring hole
A full plate of icon keychains in one run: colored bases, white raised designs
03

Keychain STL settings and recommended values

Total width

Range
25–100 mm
Default and advice
50 mm. 40–60 mm suits a house key ring

Base thickness

Range
1.5–6 mm
Default and advice
3 mm. Under 2 mm, the ring area can flex and crack

Raised height

Range
0.4–4 mm
Default and advice
1.2 mm, six 0.2 mm layers. Enough to see and feel

Ring hole

Range
2.5–8 mm
Default and advice
4 mm. The ring wall around it is 2.4 mm

Plate shape

Range
Follow letters, Rounded tag
Default and advice
Follow letters for names, Rounded tag for small logos

Border

Range
1.2–6 mm
Default and advice
2.5 mm. Thin borders around script letters can break
SettingRangeDefault and advice
Total width25–100 mm50 mm. 40–60 mm suits a house key ring
Base thickness1.5–6 mm3 mm. Under 2 mm, the ring area can flex and crack
Raised height0.4–4 mm1.2 mm, six 0.2 mm layers. Enough to see and feel
Ring hole2.5–8 mm4 mm. The ring wall around it is 2.4 mm
Plate shapeFollow letters, Rounded tagFollow letters for names, Rounded tag for small logos
Border1.2–6 mm2.5 mm. Thin borders around script letters can break

The hole sits at the left edge, centered vertically. On designs that curve inward at the left, it can sit further out than you expect; switch to Rounded tag to fix that.

04

Why use this keychain generator

Names in seven fonts

Archivo Black, Titan One, Pacifico, Lobster, Bebas Neue, Alfa Slab One and Press Start 2P, from real font outlines.

Logos and icons

Drop an SVG, or a PNG or JPG that is traced to an outline in the browser.

Two colors, no painting

Base and raised letters are separate parts in the 3MF, so a multi-color printer handles it.

Sized to width

You set the finished width; the design scales so the whole tag, ring included, matches it.

Checked watertight

Every file is a closed solid with a verified badge under the preview.

No upload

Your name or logo stays in your browser.
06

Name keychain, logo tag or something else?

Name tags for kids' bags, team logos for a club, gift tags, and small batches for a market stall all work here: the custom keychain maker sizes any outline into a tag with a hole. You can fit a dozen 50 mm tags on a typical bed.

For letters without a ring, the 3D text generator makes signs and cake toppers. For a multi-color logo with several heights, use SVG to STL. For a tiny figure of a pet to hang from the ring, image to STL builds a model from a photo in the studio.

  • Names and initials: Name tab
  • Club or brand logos: Logo / icon tab
  • 3D figures: image to STL
07

Custom keychain maker vs other ways

This custom keychain maker

Good at
Free, no account, names or logos, two-color 3MF, ring and border built in
Trade-off
Hole only at the left edge; one line of text

Keychain templates on model sites

Good at
Remixable designs with extra shapes
Trade-off
Fixed designs, or a parametric customizer to learn

Tinkercad

Good at
Combine text, shapes and holes freely
Trade-off
Account needed; you place and size the ring yourself

Ordering printed keychains

Good at
No printer needed
Trade-off
Cost per piece and shipping time
OptionGood atTrade-off
This custom keychain makerFree, no account, names or logos, two-color 3MF, ring and border built inHole only at the left edge; one line of text
Keychain templates on model sitesRemixable designs with extra shapesFixed designs, or a parametric customizer to learn
TinkercadCombine text, shapes and holes freelyAccount needed; you place and size the ring yourself
Ordering printed keychainsNo printer neededCost per piece and shipping time
08

Honest limits

The custom keychain maker takes names as a single line of up to 24 characters. The ring is always on the left edge at mid-height. Logos are flattened to one raised color on the base; for several colors at different heights, use SVG to STL. Everything runs in your browser and each file is checked watertight, so what you download is what your slicer will print. To inspect it first, use the STL viewer.

FAQ

Frequently asked questions

Is this custom keychain maker free?

Yes, with no account and no watermark. Type a name or drop a logo, set the size and ring hole, and download STL or 3MF as often as you like. The keychain is built in your browser, so your design is never uploaded, and the file is checked watertight before you save it.

What size should the keychain hole be?

The default 4 mm fits most metal split rings and ball chains. Go up to 5 or 6 mm for thick rings or lanyards, and down to about 3 mm only for thin chains. The ring around the hole is 2.4 mm wide, which holds up to daily use in PLA or PETG.

How do I print a two-color keychain?

Download the 3MF: base and letters are separate parts, so an AMS or other multi-material system can assign two filaments. On a single nozzle, slice the STL and add a filament change at the base thickness, 3 mm by default, so everything above prints in the second color.

Can I use my own logo?

Yes. Choose Logo / icon and drop an SVG, PNG, JPG or WebP up to 15 MB. Vector SVGs give the cleanest edges. Images are traced, either from transparency or from dark areas, and you can move the threshold or invert until the outline is right.

What's the best keychain STL thickness?

A 3 mm base with 1.2 mm raised letters, 4.2 mm in total, is sturdy and still light. Go to 4 mm of base for keys that get handled roughly. Below 2 mm the tag flexes and the ring area can crack.

Which filament is best for keychains?

PLA is the easiest to print and comes in the most colors, so it's the usual choice for gifts. It softens at around 60 °C, though, so a keychain left on a hot dashboard can warp. PETG is tougher and a good pick for keys that live in a pocket or a car.

Why is the ring sticking out so far?

The hole is placed at the left edge of the plate, centered vertically. If the first letter or logo curves inward there, the ring lands further out than you expect. Switch Plate shape to Rounded tag, or adjust the border, and the ring sits against a straight edge.
Start free

Put a 3D figure on your keyring

The custom keychain maker is free. For a small 3D model of a pet or character, the studio builds one from a single photo. 3 free credits, no card.

No credit card required · 3 free credits to start